FastBikes-USA LLC

Rear axle sliders for late model Ducati Monster and Sport Touring bikes with 25mm axle and steel swingarm. These will fit the following Monsters: 2002-2007 620, 695, 750, 800, 900 (Dark only), and 1000. Sporttouring applications are: 2001-2007 ST2, ST3, and ST4. They also fit the 2005-2006 Multistrada 620. Your bike must have a steel swingarm with 25mm axle and a 30mm nut on both sides. If you have a 25mm axle with a 17mm allen on one side and a 30mm nut on the other, see our sliders for aluminum swingarm. Our uniquely designed axle sliders allow installation or removal in just seconds with NO TOOLS REQUIRED. This makes rear wheel service easier and gives the sliders and your bike a smooth, clean look. Other competing products use an allen bolt mounting system that can allow the head of the allen bolt to be ground off in the event of a crash, making the sliders difficult to remove and replace. With our simple design the sliders themselves screw directly onto a light weight aluminum shaft, sandwiching the axle between the sliders. Just slide the rod thru the axle and tighten the sliders onto the ends- simple, elegant. With just hand tightening pressure our sliders mount firmly and won't loosen from vibration or impact. Axle, swingarm, and brake components are much better protected in a fall and result in lower repair costs. This system is ideal for racing or street use. Don't risk expensive damage to your Ducati, get our axle sliders and protect your valuable investment. We guarantee you won't be dissapointed. Note: These sliders are approximately 1.75" (45mm) long. All Sliders have grooves in them.